Dan Bendall

Any way you slice it, chop it, or dice it, food preparation equipment is a key to kitchen staff productivity your operation. Many, if not all, menu items require at least one of its ingredients to be diced, sliced, or processed in some way.

Almost without exception, restaurants depend on preparation equipment to speed these processes along. Since your operation depends on food preparation equipment for quality, quantity, and consistency it pays to know what you should have in the Well Equipped kitchen.

The slicer is an important basic preparation piece. There are a variety of slicers on the market with many options, but for most operators, getting a fast, consistent, portion- controlled slice is important.

Slicers for the most part will slice just about any foods including meats (raw and cooked), vegetables of all sorts, cheese, and many other common products.

Most slicers are called gravity feed models that have an angled blade and carriage to help the product slice using its own weight and allow sliced product to fall away from the blade naturally. The operator manually moves the carriage with food back and forth against a motorized rotating blade in semi-automatic models.

The fully automatic models are similar except the carriage moves back and forth automatically, increasing productivity since the operator is free to do other tasks while product is being sliced. An automatic slicer is most useful for operations requiring a large volume of bulk sliced product. Some of the more expensive models can even automatically portion sliced meats.

An important feature to look for, especially if you require a lot of thin sliced meats, is an automatic indexing carriage. The indexing carriage automatically pushes the product against the knife at each slice to assure a consistent thinly sliced meat.

There are also some high end slicers with computerized controls that can slice meat or cheese in a variety of patterns, ready for use in an attractive deli platter. The machines can stack sliced product or arrange in vertical, horizontal, or circular shingles for building party trays of cold cuts.

Most manufacturers' slicers are quite similar in both operation and appearance but the differences are in the details. Most machines use either a 10 or 12” hollow ground blade which is suitable for most production work. A larger blade diameter and a higher amperage rating usually mean a more powerful unit.

Useful extra features to look for are built-in knife sharpeners and anti-microbial protection built into components of the unit.

Slicer safety features are not to be overlooked. The most important thing to look for is how the machine is cleaned. New models are typically very easy to clean with few parts to be removed in the process. Select a slicer that you find easy to disassemble for cleaning. Many machines can have the knife guards and carriages easily removable without tools for cleaning. Features like easy tilting carriages save a lot of time in getting to the blade for cleaning.

The best slicers have features that protect the operator from the blade edge while cleaning to reduce accidents. Features as simple as rubber feet on the slicer base to keep the unit from moving easily are helpful. Some have electrical interlocks that prevent the slicer from running while certain parts are not properly in place. Another good feature for automatic slicers is a carriage that won't start moving unless it is in proper position to avoid getting bumped. Some automatic units do not start again without resetting after a power outage.

Many food preparation tasks go beyond straight slicing. Suppose you need either diced potatoes, shoestring french fries, or julienne carrots, or all three. The food processor is the one piece of equipment you need. Most can perform many cutting actions with speed and consistency. The number and sizes of the different cuts are only limited by the number of “plates” made for a particular processor model.

There are both continuous feed and bowl type processors on the market. Where consistent cut is important, typically a continuous feed machine is used. Although the unit is capable of doing many other products, vegetables are the most processed food type. The typical unit consists of a motor base, a continuous feed and discharge chute, and space for one of a selection of removable round cutting plates between the chutes.